Pacific Plastics IPS Schedule series of PVC pipe is produced for use in the pressure applications in which the maximum operating temperature is 140°F. The compound is PVC 1120 Type 1 Grade 1, with a cell class of 12454B, per ASTM D1784.
Sch80 is produced in strict compliance to ASTM D1785 and is listed with NSF, and complies with NSF/ANSI Standard 14 and Standard 61.
Sch80 pipe is installed per ASTM D2855. The joints should conform to ASTM D2672, the solvent cement to ASTM D2564 and the primer to ASTM F656.
Sch80 is for use in the Idustrial applications:
- Sizes ½” – 12” are produced in Grey color, 20 foot lengths and Belled End.
The outside diameter and wall thickness of Sch80 pipe are measured in accordance to ASTM D2122 and are shown in the following table:
OD – Outside Diameter
C – Approximate Bell Depth
T – Wall Thickness
PSI – Pressure Rating
This is to certify that, in this category of PVC pipe, all the products manufactured by Pacifi c Plastics have been inspected, sampled and tested in accordance with the following specifi cations and have been found to meet or exceed the requirements of those specifi cations.
- PVC1120 Type1 Grade1
- Cell Class 12454
- ASTM D1784 Specifi cation for Rigid PVC Compounds
- NSF Listed
- Sch80 Grey
- Solvent Weld Belled End
- ½” – 12” IPS
- ASTM D1785 Specification for PVC Pipe
- ASTM D2672 Specification for IPS PVC Pipe Joints using solvent sement
- Complies with NSF/ANSI Standard 14
- Complies with NSF/ANSI Standard 61